LM 2596 DC-DC Buck converter | Adjustable step-down module | specifications -Application
This is an LM2596 DC-DC buck converter step-down power module with a high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W)
the component is using
* LM2596 dc-dc buck converter step down module
buy material by the following a link
LM2596 dc-dc buck converter step down module - https://goo.gl/pxH5AR
MT3608 2A dc-dc Step Up Boost Power Module = https://goo.gl/c4Ys6P
Specifications
Regulator Type : Step Down ( Non Isolated input to Output )
Input Voltage : +4 to 40vdc
Output Voltage : +1.23 to 35vdc
Output Current : 2A rated, ( 3A maximum with heatsink )
Efficiency : Up to 92% ( when output voltage is set high )
Switching Frequency : 150kHz
Dropout Voltage : 2vdc minimum
Load Regulation : +/- 0.5%
Voltage Regulation : +/- 2.5%
Temperature : -40 to +85 deg C ( output power less than 10Watts )
Board Size : 43.6mm L x 21mm W x 14mm H
Application
1) Step down voltage (buck)
2)motor speed control
3) Power Supply for Battery Chargers
4) light dimmer
5) On-Card Switching Regulators
6) low power supply application
Comments